I-7565-H2

High Performance USB to 2-port CAN bus Converter

Product availability: Against PO

Country Of Origin : Taiwan

FEATURES

  • RoHS design
  • Fully compliant with USB 1.1/2.0(Full Speed)
  • Fully compatible with the ISO 11898-2 standard
  • Support both CAN 2.0A and CAN 2.0B
  • Powered by the USB bus
  • Integrated with two CAN bus channels
  • Programmable CAN bus baud rate from 5Kbps to 1Mbps or user-defined baud rate
  • Support CAN bus acceptance filter configuration
  • Time-stamp of CAN message with ±1ms precision
  • Support firmware update via USB
  • Provide API library for user program development
  • Built-in jumper to select 120 ohm terminal resister
  • PWR / RUN / ERR indicator for CAN and USB
  • Watchdog inside
  • Support Windows 2000/XP, Win7(32 & 64 bit), Linux and WinCE (available soon)
  • Provide sending CAN message by using the internal timer of module for high precision transmission
  • Check / Reset module status remotely and get current CAN bus message flow

DOWNLOAD

Hardware : 
CAN port channels 2
CAN Interface : 
Controller Microprocessor inside with 72MHz
Transceiver NXP 82C250
Connector 10-pin terminal-block connector
Baud Rate (bps) 5K ~ 1Mbps or User-defined baud rate
Transmission Distance (m) Depends on baud rate (for example, max. 1000 m at 50 kbps )
Isolation 3000VDC for DC-to-DC, 2500Vrms for photo-couple
Terminal Resistor Selectable 120Ω terminal resistor by jumper
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Pin Assignment (CAN1: CAN_H=4, CAN_L=2 ) / (CAN2: CAN_H=9, CAN_L=7 )
Receive Buffer 128 data frames for each CAN port
Max Data Flow 3000 fps for total CAN ports
USB Interface : 
Connector USB Type B
Transmission speed 12M bps
Specification USB 1.1 and USB 2.0 standard
Receive Buffer 100 data frames
LED : 
Round LED PWR / RUN /ERR LED
Software : 
Driver Windows 2000/XP, Win7(32 & 64 bit), Linux and WinCE (available soon)
Mechanical : 
Dimensions 108mm x 72mm x 35mm (H x W x D)
Installation DIN-Rail
Power : 
Power supply By USB interface
Power Consumption 1.5 W
Dip Switch Init (Firmware Update) / Normal (Firmware Operation)
Environment : 
Operating Temperature -25 ~ 75 ℃
Storage Temperature -30 ~ 80 ℃
Humidity 10 ~ 90% RH, non-condensing