CSMSTRZR

High Performance Protocol Converter, Data Logger

Product Availability: AGAINST PO

Country Of Origin : Taiwan

FEATURES

  • Provides Enhanced Features for Data Acquisition or Multi-zone PID Control Applications
  • Supports up to 16 Modular Controller Modules
  • Stores Module Configuration Information and Automatically Reprograms Replaced Modules
  • Protocol Conversion Feature Converts up to15 Protocols Simultaneously
  • Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
  • 2  RS-232 Serial Ports
  • 1 RS-422/485 Serial Port
  • 10 Base-T/100 Base-TX Ethernet Port
  • Independent Serial Ports Provide Virtually Unlimited Integration Methods
  • CompactFlash ® Slot Allows Process Data to be Logged Directly to CSV Files
Communications :
USB/PG Port : Adheres to USB 2.0 specification full speed only via Type B connection
USB Host Port :
Complies with Universal Serial Bus Specification Rev 2.0.Support data transfers at full-speed. Hardware over current protected
(0.5 A max).
Serial Ports : Format and Baud Rates for each port are individually software

programmable. Serial ports are individually isolated.
Communication port to port 1500 VAC
Communication ports to power 1000 VDC
Communication ports to earth 1000 VDC
RS232/PG Port : RS232 port via RJ12
COMMS Ports : RS422/485 port via RJ45, and RS232 port via RJ12
Ethernet Port : 10 BASE-T / 100 BASE-TX
LEDs :
STS : Status LED indicates condition of master.
USB HOST : HOST LED indicates port status/activity.
TX/RX : Transmit/Receive LEDs show serial activity.
Ethernet : Link and activity LEDs.
CF : CompactFlash LED indicates card status and read/write activity
MEMORY :
On-board User Memory : 128 Mbytes of non-volatile Flash memory.
On-board RAM: 64 Mbytes
Memory Card: CompactFlash Type II slot for Type I and Type II cards
Power :
Power :
24 VDC ± 10%
450 mA min. (1 module)
3.4 Amps max. (16 modules + Expansion Card)
Must use NEC Class 2 or Limited Power Source (LPS) rated power supply
POWER CONNECTION : Removable wire clamp screw terminal block.
Wire Gage Capacity: 24 AWG to 12 AWG
Torque: 4.45 to 5.34 in/lb (0.5 to 0.6 N-m)
MOUNTING : Snaps onto standard DIN style top hat (T) profile mounting rails according to EN50022 -35 x 7.5 and -35 x 15.
ENVIRONMENTAL CONDITIONS :
Operating Temperature : 0 to 50°C
Storage Temperature : -30 to 70°C
Storage Humidity : 80% maximum relative humidity (noncondensing) from 0 to 50°C.
Vibration to IEC 68-2-6 : Operational 5-150 Hz, 1 g
Shock to IEC 68-2-27 : Operational 25 g
Operating and Storage Humidity : 80% max relative humidity
CERTIFICATIONS AND COMPLIANCES: CE Approved EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
Safety requirements for electrical equipment for measurement, control, and laboratory use:
EN 61010-1: General Requirements
EN 61010-2-030: Particular Requirements for Testing and Measuring Circuits
EN 61010-2-201: Particular Requirements for Control Equipment
RoHS Compliant
UL Listed: File #E302106
UL Hazardous: File #E317425
ABS Certificate #09-HS426719-B-4-PDA