IFMA0065

DIN-RAIL FREQUENCY TO ANALOG CONVERTER

Product Availability: AGAINST PO

Country Of Origin : Taiwan

FEATURES

  • SIMPLE ON-LINE RANGE SETTING (Using Actual Input Signal or Signal Generator)
  • USER SETTABLE FULL SCALE FREQUENCY FROM 1 Hz to 25 KHz
  • FOUR OUTPUT OPERATING RANGES (0 to 5 V, 0 to 10 V, 0 to 20 mA, and 4 to 20 mA) \
  • INPUT CIRCUIT ACCEPTS OUTPUTS FROM A VARIETY OF SENSORS
  • 85 to 250 VAC and 9 to 32 VDC POWERED VERSIONS AVAILABLE
  • LOW FREQUENCY CUT-OUT AND OVER RANGE INDICATION
  • 3-WAY ELECTRICAL ISOLATION (POWER/INPUT/OUTPUT)
  • INPUT AND OUTPUT INDICATION LEDs.

DOWNLOAD

POWER:
AC Operation:
85 to 250 VAC, 48 to 62 Hz; 6.5 VA
 DC Operation: 9 to 32 VDC; 2.5 W
Power Up Current:  Ip = 600 mA for 50 msec. max
SENSORS:
SENSOR POWER:  (AC version only) +12 VDC ±25% @ 60 mA max.
SIGNAL INPUT: DIP switch selectable to accept signals from a variety of sources, including switch contacts, outputs from CMOS or TTL circuits, magnetic pickups, and all standard RLC sensors.
Current Sourcing:  Internal 1 K? pull-down resistor for sensors with current sourcing output. (Max. sensor output current = 24 mA @ 24 V output.)
Current Sinking: Internal 3.9 K? pull-up resistor for sensors with current sinking output. (Max. sensor current = 3 mA.)
Low Bias:  Input trigger levels VIL = 0.25 V, VIH = 0.75 V; for increased sensitivity when used with magnetic pickups.
Hi Bias:  Input trigger levels VIL = 2.5 V, VIH = 3.0 V; for logic level signals. Max.
Input Signal:  ±90 V; 2.75 mA max. (With both Current Sourcing and Current Sinking resistors switched off.)
SIGNAL VOLTAGE & CURRENT :
SIGNAL VOLTAGE OUTPUT (Selectable):  0 to 5 VDC @ 10 mA max.

0 to 10 VDC @ 10 mA max
SIGNAL CURRENT OUTPUT (Selectable): 0 to 20 mA @ 10 VDC min.

4 to 20 mA@ 10 VDC min.
OUTPUT COMPLIANCE : Voltage : 10 V across a min. 1K? load (10 mA). Factory calibrated for loads greater than 1 M?.

Current : 20 mA through a max. 500? load (10 VDC)
ACCURACY: 
ACCURACY : ±0.1% of full scale range (±0.2% for 0 to 5 VDC range).
RESOLUTION : Voltage : 3.5 mV min.

Current : 5 μA min.
RESPONSE TIME:  5 msec +1 period to 10 sec +1 period; user selectable
ISOLATION BREAKDOWN VOLTAGE (Dielectric Withstand): 2200 V between power & input, and power & output; 500 V between input & output for 1 minute
Warrenty : 1 Year carry in.