LMP-0501-M

LMP-0501-M

5-Port Industrial PoE+ Managed Ethernet Switches w/4*10/100Tx (30W/Port), and 1*100Fx Multi-Mode 2Km

Product availability : Against PO.

FEATURES

  • Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC/ST) Fiber Port
  • Fiber Supports: Multi-Mode in 2Km; Single-Mode in 30Km
  • Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Telnet, CLI Command
  • Supports IGMP v1/v2, up to 256 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c
  • PoE Ping Alarm Function for PoE Ports Power Recycle
  • System Warning Setting for Automatic Warning through EMail
  • Redundant Power Input Design: 48~55VDC
  • Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
  • Operating Temperature Range: STD: -10° to 70°C, EOT: – 40° to 75°C
  • 5-Year Warranty

DOWNLOAD

Technology:
Standards IEEE 802.3 10Tx Ethernet
IEEE 802.3u 100Tx Fast Ethernet
IEEE 802.3x Flow Control for Full Duplex
IEEE 802.3at/af PoE (Power-over-Ethernet)
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree
Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree
Protocol)
ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring
Protection Switch)
IEEE 802.1q Virtual LANs (VLAN)
IEEE 802.1x Network Authentication
IEEE 802.1ad Stacked VLAN, Q-in-Q
IEEE 802.1p QoS/CoS Protocol for Traffic
Prioritization
Switch Properties:
Protocol CSMA/CD, IGMPv1/v2, SNMPv1/v2, TFTP,
SNTP, SMTP, RARP, Syslog
Configuration Web Console, Telnet, CLI
Transfer Rate 14,880pps for 10Base-T Ethernet port
148,8800pps for 100Base-T Fast Ethernet port
Packet Buffer 1 Mbits
MAC Table 8K
VLAN Group 0~4094
IGMP Group Up to 256 Groups
Flow Control IEEE 802.3x for full duplex mode, back
pressure for half duplex mode
Port Interface:
Ethernet RJ45 Port 4*10/100BaseTx (PSE: 30W/Port) auto
negotiation speed, Full/Half duplex mode, and
auto MDI/MDI-X connection
Fiber Port 1*100Fx (SC or ST type connector);
Multi-mode 2Km, Single-mode 30Km
Wavelength 1310nm (Multi or Single Mode)
PoE Port Pin
Assignment		 V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI
Alternative A)
RS232 Serial
Console		 1*RS232 in RJ45 connector with console cable,
115.2Kbps, 8, N, 1
Configuration Backup 1*USB 2.0
Protection:
Overload Current Present
Power Reverse Polarity Present
CPU Watch Dog Present
Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable;
100Base-TX: 2-pair UTP/STP Cat. 5 cable.
EIA/TIA-568 100-ohm (100m)
Mechanical Characteristics :
Housing Metal IP30 Rated
Dimensions 46 x 142 x 99 mm
Weight Unit: 1.5 Ibs;
Shipping: 2.3 Ibs
LED Indicators Per Unit: Power 1 & 2 (Green), Fault
(Red)
PoE: Feeding Power (Green)
Mounting DIN-Rail, Wall Mount (Optional)
Power Requirement:
Input Voltage 48~55VDC Redundant Input
Power Connection 1 removable 6-contact terminal block
PoE Power Output 25W @ 48VDC (per PoE port);
30W @ 51~55VDC (per PoE port)
Power Consumption 10 Watts (no PD included);
130 Watts (Fully loaded)
Environmental Limits:
Operating
Temperature		 STD: -10 ~ 70 °C
EOT: -40 ~ 75 °C
Storage Temperature -40 ~ 85 °C
Ambient Relative Humidity 5% to 95%, (non-condensing)
Regulatory Approvals:
EMC FCC (Class A)
EMS EN61000-4-2,3,4,5,6,8
EN61000-6-2,4
Free Fall IEC60068-2-32
Shock IEC60068-2-27
Vibration IEC60068-2-6
Green RoHS Compliant
Certifications FCC, CE,
UL 61010-1, UL 61010-2-201
Warranty 5 Years